3 Point LH Lower Lift Arm Fits Ford/New Holland Replaces AMD0NN555C

Description

One New Aftermarket 3 Point LH Lower Lift Arm

Tech Info:
-Category 1
-Accommodates 7/8″ drawbar or lower link pins
-31-5/8″ center to center on the ball
-Left hand side
-Offset tractors must drill hole for sway chain
-The arm is 1/2″ thick and at widest point is 3″ wide

Made to Fit Ford/New Holland:
Tractor Models: 640 (W/ 4 CYL, 1/55-12/57), 641 (W/ 4 CYL, 1/58-12/64), 650 (W/ 4 CYL, 1/56-12/57), 651 (W/ 4 CYL, 1/58-12/64), 660 (W/ 4 CYL, 1/59-12/63), 700, 701, 800, 800 SERIES (1955 To 1964), 801, 900, 901, 4120 (W/ 4 CYL, 1/63-12/64), 4121, 4130, 4131 (W/ 4 CYL, 1/63-12/64), 4140, 4600SU (W/ 3 CYL, 1/75-7/81), 4610N (W/ 3 CYL, 1/81-2/90), 4610NO (W/ 3 CYL, 1/81-2/90), 4610O (W/ 3 CYL, 1/81-2/90), 501 (W/ 4 CYL, 1/57-12/62), 530A, 531 (W/ 3 CYL, 1/75-12/81), 600 (W/ 4 CYL, 1/57-12/57), 600 SERIES (1955 To 1964), 601 (W/ 4 CYL, 1/57-12/62), 611 (W/ 4 CYL, 1/59-12/64), 620 (W/ 4 CYL, 1/54-12/64), 621 (W/ 4 CYL, 1/58-12/64), 630 (W/ 4 CYL, 1/55-12/57), 631 (W/ 4 CYL, 1/58-12/64), 3600R (W/ 3 CYL, 1/75-12/77), 3600V (W/ 3 CYL, 1/75-12/81), 3610, 3610N (W/ 3 CYL, 1/81-4/83), 3910 (W/ 3 CYL, 5/83-2/90), 3910H (W/ 3 CYL, 1/83-2/90), 3910N (W/ 3 CYL, 1/83-2/90), 3910R (W/ 3 CYL, 1/81-12/84), 3910V (W/ 3 CYL, 12/83-2/90), 4000, 4030, 4031 (W/ 4 CYL, 1/60-12/62), 4040, 4100, 4110 (W/ 3 CYL, 1/65-12/74), 4110 (W/ 3 CYL, 1/81-2/90), 4110N (W/ 3 CYL, 12/81-2/90), 4110NO (W/ 3 CYL, 1/81-2/90), 4110O (W/ 3 CYL, 1/81-2/90), 4110V (W/ 3 CYL, 1/81-2/90), 233 (W/ 3 CYL, 1/75-12/81), 2600 (1965 To 1981), 2600N (W/ 3 CYL, 1/75-12/81), 2600R (W/ 3 CYL, 1/75-12/81), 2600V (W/ 3 CYL, 10/75-9/76), 2610 (W/ 3 CYL, 1/81-4/83), 2810 (W/ 3 CYL, 1/83-2/90), 2910 (W/ 3 CYL, 1/83-2/90), 3000 (1965 To 1981), 3100, 3110, 3120, 3300, 333 (W/ 3 CYL, 1/75-12/81), 3330, 334 (W/ 3 CYL, 1/81-4/83), 335 (W/ 3 CYL, 1/83-2/84), 3400, 3600 (1965 To 1981), 3600N (W/ 3 CYL, 1/75-12/81), 2000 (1965 To 1981), 2031 (W/ 4 CYL, 1/60-12/62), 2100 (W/ 3 CYL, 3/65-12/74), 2110 (W/ 3 CYL, 1/65-12/74), 2111, 2120 (W/ 3 CYL, 1/65-12/74), 2120 (W/ 4 CYL, 1/63-12/64), 2131 (W/ 4 CYL, 1/63-12/64), 2150 (W/ 3 CYL, 1/70-12/74, U.K. Only), 230A (W/ 3 CYL, 1/81-4/83), 2300 (W/ 3 CYL, 1/65-12/74), 231 (W/ 3 CYL, 1/75-12/81), 2310 (W/ 3 CYL, 3/82-12/83)
Replaces Part Number(s): AMD0NN555C, D0NN555CLH

Industrial/Construction Models: 1801, 1811, 1821, 1841, 1871, 1881, 3500 (W/ 3 CYL, 1/65-12/74)
Replaces Part Number(s): AMD0NN555C, D0NN555CLH

Models This Part Fits:

2000, 2100, 2110, 2300, 2600, 2610, 3000, 3100, 3600, 3610, 4000, 4110, 800Additional Information: Category 1Accommodates 7/8″ drawbar or lower link pins31-5/8″ center to center on the ballLeft hand sideOffset tractors must drill hole for sway chainThe arm is 1/2″ thick and at widest point is 3″ wide

Reference Numbers:

D0NN555C, D0NN555C-A, WN-D0NN555C